Counterbalanced forklift H50 – H80 EVO

Characteristics

Motor type
diesel, LPG
Operator
ride-on
Applications
handling, industrial
Other characteristics
4-wheel, counterbalanced, compact, heavy-duty, high-performance
Carrying capacity

5,000 kg, 6,000 kg, 7,000 kg, 8,000 kg (11,023.1 lb)

Lifting height

2,750 mm, 3,150 mm, 3,550 mm (108.27 in)

Overall width

Min.: 1,870 mm (73.6 in)

Max.: 2,305 mm (90.7 in)

Load center distance

600 mm, 900 mm, 1,100 mm (23.6 in)

Weight without load

Min.: 9,980 kg (22,002.1 lb)

Max.: 14,873 kg (32,789.4 lb)

Axle loading with maximum load front

Min.: 12,504 kg (27,566.6 lb)

Max.: 20,586 kg (45,384.4 lb)

Axle loading with maximum load rear

Min.: 1,919 kg (4,230.7 lb)

Max.: 2,585 kg (5,698.9 lb)

Axle loading without load front

Min.: 4,675 kg (10,306.6 lb)

Max.: 7,518 kg (16,574.4 lb)

Axle loading without load rear

Min.: 5,211 kg (11,488.3 lb)

Max.: 7,428 kg (16,375.9 lb)

Track width front

Min.: 1,594 mm (62.8 in)

Max.: 1,752 mm (69 in)

Track width rear

1,550 mm, 1,600 mm (61 in)

Height of mast when lowered

Min.: 2,735 mm (107.7 in)

Max.: 2,738 mm (107.8 in)

Free lift

150 mm (5.9 in)

Overall height with mast raised

Min.: 4,144 mm (163.1 in)

Max.: 4,448 mm (175.1 in)

Height to top of overhead guard

Min.: 2,746 mm (108.1 in)

Max.: 2,748 mm (108.2 in)

Seat height

Min.: 1,507 mm (59.3 in)

Max.: 1,509 mm (59.4 in)

Tow couplig height

827 mm, 828 mm, 830 mm (32.6 in)

Length to fork face

Min.: 3,519 mm (138.5 in)

Max.: 4,139 mm (163 in)

Fork carriage width

1,800 mm, 2,180 mm, 2,400 mm (70.9 in)

Ground clearance under mast with load

201 mm, 204 mm, 208 mm (7.9 in)

Ground clearance at center of wheelbase with load

Min.: 248 mm (9.8 in)

Max.: 251 mm (9.9 in)

Turning circle radius

Min.: 3,186 mm (125.4 in)

Max.: 3,850 mm (151.6 in)

Travel speed

22 km/h, 23 km/h (13.7 mph)

Lifting speed

Min.: 0.4 m/s (1.3 ft/s)

Max.: 0.5 m/s (1.6 ft/s)

Lowering speed

Min.: 0.5 m/s (1.6 ft/s)

Max.: 0.6 m/s (2 ft/s)

Rated output

72 kW, 85 kW (97.9 hp)

Rated speed

2,200 rpm, 2,500 rpm (13,823 rad.min-1)

Maximum operating pressure

265 bar (3,843.5 psi)

Oil flow

95 l/min (25.1 us gal/min)

Noise level

76 dB, 77 dB

Description

Impressive Operating Performance – Minimal Maintenance Breaks

Safe handling and high handling performance – with the H50 – H80 EVO IC trucks, the two go hand in hand. These robust trucks are ideally suited to heavy-duty applications with large loads. The protective driver’s roof and frame form a single compact unit to ensure greater safety, while the slim profile of the lift mast improves the driver’s vision. Powerful engines, the hydrostatic direct drive, and the Linde Load Control lift mast control system all guarantee high operational performance. Plus, the hydrostatic drive operates without a transmission, clutch, differential or drum brakes – reducing servicing time and further increasing handling capacity.

Characteristics
Safety

The Linde Protector Frame surrounds the driver like a large protective jacket, the cab roof and frame forming a single, enclosed unit. What’s more, the H50 – H80 EVO IC trucks feature a torsion support that reduces dangerous lift mast rotations at high load heights by up to 30 percent. There is a steel grid on the roof which shifts when the driver tilts the mast forward or backward, protecting the driver from falling loads. The good all-round visibility, high lifting capacity, control delay-free braking, and fully hydraulic steering all provide additional safety.

• – Linde Protector Frame
• – Linde torsion support
• – Good visibility thanks to slim lift mast
• – Excellent stability
• – Electronic end position cushioning

Related Posts

Diesel forklift CPCD series

Characteristics Motor type diesel, LPG, gasoline Operator ride-on Applications loading, unloading, industrial, for warehouse Other characteristics 4-wheel, counterbalanced, high-performance Carrying capacity 1,000 kg, 1,500 kg, 1,800 kg…

Diesel forklift M 26-2 ST5

Characteristics Motor type diesel Operator ride-on Applications handling, for the construction industry, for the wood industry, for mining applications Other characteristics 4-wheel, compact, rough terrain Carrying capacity…

Diesel forklift MAX-8 IC series

Characteristics Motor type diesel, LPG Operator ride-on Applications handling, industrial, for warehouse Other characteristics 4-wheel Carrying capacity Max.: 7,000 kg (15,432.4 lb) Min.: 1,500 kg (3,306.9 lb) Lifting height…

LGV forklift MAD-3000

Characteristics Motor type combustion engine Operator LGV Applications precision, pallet Carrying capacity 1,700 kg (3,747.9 lb) Lifting height 3,600 mm (141.73 in) Lifting speed 0.2 m/s (0.7…

LGV forklift MAD-5000

Characteristics Motor type combustion engine Operator LGV Applications precision, pallet Carrying capacity 4,000 kg (8,818.5 lb) Lifting height 5 m (16'04") Lifting speed 0.3 m/s (1 ft/s)…

Gasoline-powered forklift truck FD T series

Characteristics Motor type diesel, gasoline-powered Operator ride-on Applications outdoor Other characteristics counterbalanced, low-noise Carrying capacity Max.: 4,000 kg (8,818.5 lb) Min.: 1,500 kg (3,306.9 lb) Lifting height 3,000 mm…